General Command 2

General Command (AutoCAD) 

Page # 2

• SCALETEXT

Using this command you'll be able to amendment the size of existing Text or Mtext object within the drawing.

To use this command kind SCALETEXT on the instruction press enter and choose the text from drawing area and press Enter again.

Now choose “Existing” choice from the instruction so choose “scale factor” choice and then kind the size during which you wish to convert the text height and press enter. When the scale of those text entities r modified the bottom purpose can stay mounted.

• BASE Using this command you can change the base point of a drawing without changing its origin.

This is particularly useful within the scenario wherever you wish to insert the drawing into another as

a Xref.By default, AutoCAD takes origin because the base purpose which may be changed exploitation this
command without changing the origin.

• DWGPREFIX If you have a drawing open in AutoCAD and you don’t know the location where it is saved you can simply type DWGPREFIX command to look it.

This command is wont to quickly notice the location of Xref’s attached in the drawing.

• TJUST Using this command you can change the text justification of Text and Mtext elements in the drawing.

• UNITS

Using this command you'll be able to set the drawing units and different settings just like the exactitude of linear and angular dimensions and default rotation angle.

• ML Using this command you can make a multiline geometry which contains multiple parallel lines.

• TINSERT

You can insert a block or a drawing as a block within the table exploitation this command.

You can also fit the block within the table cell and additionally justify its location mechanically with TINSERT dialogue box.

• MIRRTEXT

By default, AutoCAD doesn't mirror text within the drawing however if you wish to mirror the text of

your drawing then change the value of MIRRTEXT system variable to 1.AREA As the name suggests this command can be used to find the area of closed or open shapes in
the AutoCAD drawing.

To know additional regarding finding the world in AutoCAD drawings refer this

related article.

Related: the way to notice space in AutoCAD drawings, here are three different ways

• TORIENT Using this command you can reorient text entities in best readable position. In the image A below the text is oriented at different angles and in some of the situations, the text is not properly readable.Whereas in image B below TORIENT command has been wont to build the text readable for all angles.

• ID This command can be used to find the coordinate values of a point in AutoCAD drawing.
• MINSERT Using this command you can insert existing blocks of a drawing as a rectangular array component. An array added using MINSERT command can’t be exploded.
• BOUNDARY Using this command you can extract closed boundaries from any enclosed area. This boundary can be wont to notice the world of the penned region or for several different applications.

• DIMROTATED This command can be used to make a dimension line inclined to a particular angle with respect to the positive side of the X-axis.

• BREAKLINE You can use this tool to make a Breakline symbol on a line. Type BREAKLINE on the command line , press enter then click on scale choice of the instruction and apply an applicable scale to the breakline.Select the beginning and finish purposes of the breakline then click at any point on the road to specify the location of breakline or directly press enter to place it exactly at the center of the line.

• TXT2MTXT Using this command you can convert a text object into a Mtext object and you can also combine multiple separate Mtext objects into a single Mtext unit.

• SAVEALL As the name suggests this command can be used to save all of the open drawings in AutoCAD window